Here’s a little bit more info that I thought I would pass on. It’s the Yamaha dealer assembly manual for the first AG200L. It is still relevant to the new models but the eagle eyed among you will notice the 6 volt battery, the early fuel tap and the split pins used in the axles. I will post up the later manual (if there even is one?) as I come across it.
If you have an AG and the cable routing looks a bit dodgy, you can check this document to see if the cable routing has been done correctly from the dealer – you would be amazed at how many don’t read the manual! All the cable routing info is in the workshop manual that I have already listed anyway, but I still think this doc is cool if you are into these bikes.