AG200L assembly guide

Here’s a little bit more info that I thought I would pass on. It’s the Yamaha dealer assembly manual for the first AG200L. It is still relevant to the new models but the eagle eyed among you will notice the 6 volt battery, the early fuel tap and the split pins used in the axles. I will post up the later manual (if there even is one?) as I come across it.

If you have an AG and the cable routing looks a bit dodgy, you can check this document to see if the cable routing has been done correctly from the dealer – you would be amazed at how many don’t read the manual! All the cable routing info is in the workshop manual that I have already listed anyway, but I still think this doc is cool if you are into these bikes.

Enjoy!

AG200L assembly guide

Cheers

AGman

3 thoughts on “AG200L assembly guide

  1. Howdy,
    I have been trying to download the AG-200 assembly guide and the owner manuals,. I can download the owner manuals but can not print , where as I can’t even get to have a squiz at the assembly guide .Any clues? I am enjoying the site and refer to it a bit. Keep up the good work.
    Cheers Liam.

    1. Hi Liam
      Just went and checked them and they are all still up…something going on at your end, you might want to try re-installing or updating your PDF software, that would be my first guess. Let me know how you go. All these docs have had thousands of downloads with no complaints from anyone so I’m guessing there is an issue with your PC or your software.
      Cheers
      AGman

Leave a Reply

Your email address will not be published.